3DJAKE Magnetic Plate, 235 x 235 mm

Improve your printer with this simple upgrade!

$16.21

(All prices excl. VAT. - Excludes delivery costs)

Model type : 235 x 235 mm

Delivery by Thursday, 04 April if you order by Friday at 13:30.

In stock

Quantity discount available!

  • from 2 only $15.40 / pc -5%

Features & Advantages

  • Good adhesion
  • Flexible
  • High quality
  • Simple installation and use

Item no.: CB-MB235X235, Content: 1 pc, EAN: n/a

Description

Our solution for easy model removal

I'm sure we've all had that experience where you have been printing for hours and finally see a wonderfully perfect result, only that the finished model sticks to the platform and you have to take it off carefully and delicately. If things go wrong, all the work and time was wasted. On behalf of all makers, we now offer this simple and practical solution. Simply remove the flexible plate and effortlessly remove your print by bending the plate. Don't worry, our flex plate is really flexible!

Adhesion

The surface of our flex plate has been specially developed to offer better adhesion than conventional print surfaces.

Simple application

  1. Our flexible build surface can be used universally for every printer. Simply choose the right dimensions for your printer. If necessary, you can even cut the flex plate to a smaller size yourself to fit your printer.
  2. After receiving the product, simply clean the platform of your printer and stick the magnetic base on it.
  3. Then simply place the flexible surface on the magnetic base.
  4. Place the printhead upon the build surface. A normal sheet of paper should fit just between the nozzle and the surface.
  5. After printing, you can simply take the flex plate off the printer and by bending it with your hands, the model will pop right off!

Contents of delivery

  • 1 x magnetic base with adhesive back
  • 1 x flexible magnetic surface

The magnetic plate is suitable for a max. heated bed temperature of 80 ° C.

Caution: Cleaning with acetone can damage the plate

Questions & Answers about 3DJAKE Magnetic Plate

Receive answers from other customers who purchased this product. Please forward any other order-related questions to our Customer Service Team.

  • will I have to cut holes in magnetic plate to access screws which hold printbed to runners? Is that OK, easy, safe?

    3 Answers, last answered on June 14 2021

  • Would this be suitable for the Anycubic Mega Zero that does not have a heated base?

    1 Answer, last answered on December 11 2020

  • Hello Can both the magnetic plate and the flexible plate be cut down to size please?

    1 Answer, last answered on February 11 2021

  • When levelling printing surface on Elgoo Neptune2 with plate and magnetic base installed, rear left quadrant will not lower enough to give any nozzle clearance... help??!!

    1 Answer, last answered on November 19 2022

  • Will one of these fit the new Ender 6?

    1 Answer, last answered on June 16 2021

  • I have one of these on my Cr10 but need to print ABS recommended temp is 100 for the bed as anyone used these with abs ?

    This question has not been answered yet.

  • Hi. The two worries I have is that 1) the heat from the bed won’t reach through the plate and 2) the adhesive may give off toxic fumes when heated. Any help?

    1 Answer, last answered on December 28 2021

  • I have CR10 S4 & bed is a little warped (low in middle) which is why I use aluminium tape to build it up then 3mm mirror on top. Could I put this PEI sheet directly on bed & tape ?

    1 Answer, last answered on June 29 2022

  • Could you use this on a zortrax M300, if you bought a larger size and cut it to fit?

    1 Answer, last answered on November 02 2021

  • I printed a shape with 0.25mm PLA on to this bed at 50o and it stuck to the bed. Even when cold and the bed was flexed the model would not come off. Anyone else had this problem?

    This question has not been answered yet.

Show all answers

Customer Reviews

12 English reviews written for 3DJAKE Magnetic Plate

100 customer reviews in all languages

3,6 out of 5 stars
5 stars
100 (46%)
4 stars
29 (13%)
3 stars
33 (15%)
2 stars
20 (9%)
1 Stars
35 (16%)

217 reviews
12 customer reviews in English
100 customer reviews in all languages

Related products

  • placeholder
  • placeholder
  • placeholder
  • placeholder

Customers also bought

  • placeholder
  • placeholder
  • placeholder
  • placeholder