7 English reviews written for Anycubic Wash & Cure
11 customer reviews in all languages
5 stars | | 20 | (68%) |
---|---|---|---|
4 stars | | 7 | (24%) |
3 stars | | 0 | (0%) |
2 stars | | 1 | (3%) |
1 Stars | | 1 | (3%) |
Filter reviews:
-
-
Good for washing / curing so so
Rated with 4 out of 5 stars.
a relative bought me the Anycubic Wash & Cure as a present, but I’ll try to not let the ‘price’ affect this review...
I’ve been resin printing for a while using a variety of methods for washing and curing and I do think this station is good for washing, although it is nothing a magnetic stirrer of decent quality couldn’t match.
Nonetheless, quality magnetic stirrers do cost a fair amount and you still have to sort out the container you’re going to use, and how your printed parts are going to be immersed in it. That is where this product shines as it comes with everything you need (well, depending on your printer you might have to sort out a clamp to attach the build plate to, or use the provided basket).
When it comes to curing this is another story, it is rather underwhelming, with a single set of LED which is adequate for a single large model but not so much for a plate of smaller objects. The timer control is also very vey limited, with a minimum of 2 mins and maximum of 6, in 2 mins steps...the Elegoo Mercury does much better than this at a fraction of the cost.
Overall, I think this is a good product, hence the 4 star rating, however as a dual purpose machine I am not entirely convinced and will use it solely as a washing station (in addition to my trusty DK Ultrasonic), my various curing chambers are not going to be retired anytime soon.Was this rating helpful? (3) (0)
-
Anycubic wash and cure
Rated with 5 out of 5 stars.
This I item I should have purchased when they first came out great product
Was this rating helpful? (1) (1)
-
Great Product, can definitly recommend it to anyone with a resin printer!
Rated with 5 out of 5 stars.
I've used almost all the possible cleaning methods for SLA prints: swirl in IPA, use a brush with IPA, use an ultrasonic cleaner, different dedicated resin solvents, the whole lot and I can't quantify how much this has changed my life.
Clean up is no longer a lengthy process that I dread. It has become a quick and easy joy.
Take off the print plate, set it up onto the adapter, dip everything into the solvent, press a button, wait 6 minutes and it cleans everything perfectly.
I know this probably sounds like a testimonial, but I'm SLA printing since 2017 and this has really simplified the post processing. Yes, the price is a bit high, but I can't not give this product 5 stars. It does exactly what it says, and it does it really well.Was this rating helpful? (2) (0)
-
broke product
Rated with 2 out of 5 stars.
so i recently buyed the curing and washing station. and the first problem with it was the plastic box, i tried to close the box what origenaly is for the isopropanol but i noticed it was broken out of the box.
i hope someone wil contact me from 3d jake for helping me with this problem.
so the box is broke and i can not do the cleaning with the wash and cure station.....
pls contact me and help me with this problemWas this rating helpful? (0) (3)
-
Doesn’t work
Rated with 1 out of 5 stars.
It only came with an Eu 2 pin plug despite the shipping address being to England which has a 3 pin system so it can’t be used out the box. When running the Photon S plug which was UK based into the transformer it still didn’t work displaying an error not covered in the instruction manual. Whilst I think it could be a good bit of kit this review is 1 star until it starts working.
Was this rating helpful? (0) (2)
-
Does the job!
Rated with 4 out of 5 stars.
Wish that the timer setting could be changed. Some liquids require a 30 minute rinse and wash cycle so I’d have to start it 5 times which get annoying after a while.
Was this rating helpful? (1) (0)
Magazine Articles:
Discover 3DJake:
-
Delivery in 3 business days.
More than 9.200 products
Secure payments
with SLL encryption technology
Great
Rated with 5 out of 5 stars.
This has made my first steps into 3D printing so much easier.
Was this rating helpful? (1) (1)