Anycubic Kobra 3 V2 Combo

When the Anycubic Kobra 3 V2 meets the ACE Pro Multi Material System, a powerful 3D printer becomes a real creative powerhouse. Up to eight different filaments, processed fully automatically - for you this means: colourful projects without limits, smooth transitions between materials and colours, as well as a new dimension in 3D printing.

And the best thing? You don't need any technical fine-tuning or fiddling with accessories. The intelligent combination of high-speed printing, smart extrusion calibration, integrated filament dryer and automatic vibration compensation makes every print not only more beautiful, but also easier!

► Anycubic Kobra 3 V2

With ultra-fast printing speed, intelligent auto levelling and smart technology, the Anycubic Kobra 3 V 2 brings welcome variety to the building board. It does the precision work almost by itself: One-click nozzle changes, automatic extrusion calibration and vibration-free printing ensure that you can concentrate fully on what matters - your next print project!

Think big for big ideas - 255 x 255 x 260 mm build volume

With a build volume of 255 x 255 x 260 mm, you have plenty of space for your most creative projects. Whether you use ready-made models from the web or design your own - the Kobra 3 V2 is ready to bring your visions to life!

Rocket launch for your prints

600 mm/s speed and 20,000 mm/s² acceleration - that means: super-fast from the first layer to the finished model, without compromising on quality!

Full metal hotend - high-tech right up to the nozzle

The full-metal hotend with quick-change system makes changing nozzles child's play! At the same time, the advanced design minimises material loss and ensures a clean print image.

Level up when levelling

The LeviQ 3.0 auto levelling technology ensures a textbook first layer. Thanks to the widened Y-axis (60 mm) and the improved SG15 bearings on the X-axis, your print bed is not only more stable, but also more precise than ever.

Automatic and ingenious - extrusion, calibration, vibration

The printer recognises which filament you are using in real time and adjusts the temperature, speed and flow rate fully automatically. Even smarter: the one-click vibration compensation eliminates surface defects and creates smooth layers as if cast from a single mould.

Further features:

• Modular design for a smooth start,
• AI monitoring,
• Power loss and filament runout resume printing,
• New Anycubic Slicer Next software based on Orca software,
• Pre-configured printing parameters, material suggestions and automatic adjustments to ensure the best printing results,
• User-friendly app control with control via your mobile phone or computer, remote monitoring and timelapse videos,
• Makeronline platform: explore the imagination of other 3D printing enthusiasts, share your creations with the community and take part in exciting competitions or prize draws.

►Anycubic ACE Pro

With the Anycubic Color Engine Pro (ACE Pro), you can print multiple materials simultaneously, create complex objects in colourful combinations and save time and resources.

► Compatible filament spools:

• Spool diameter 195-200 mm,
• Spool width 60-68 mm.

Print with 4 to 8 different colours simultaneously

The automatic multicolour material system has 4 spool slots and can hold up to 4 different colours at the same time to optimally support your multicolour printing. With an additional ACE Pro system, you can even achieve 8-colour printing with a wide range of colours.

How does multicolour printing with the Color Engine Pro work?

The desired colours are automatically switched during the printing process according to your slicer settings and the corresponding consumables are delivered to the printer. It's that simple!

Active drying function for more printing success

ACE Pro uses a dual 200 watt PTC heating element for active and even drying of your filaments during the printing process. The heating module is supported by two powerful fans that ensure 360° hot air circulation.

Whether PLA, ABS or PETG - the ACE PRO has the right moisture settings for different filaments. All you have to do is select the desired filament type and the rest takes care of itself.

Drying during printing or filament storage

Forget additional dryers - the ACE PRO does it all for you. The system ensures that your filaments are optimally dried around the clock, even during printing. This means less effort for you and a boost for your productivity!

The drying function can, of course, be used throughout the entire printing process to provide moisture-free filaments at all times. However, thanks to the sealed space design, the Color Engine Pro can also be used for the safe and careful storage of filaments.

Design with anti-twist protection

The Anycubic Colour Engine Pro is connected to the extruder in parallel via four output lines. As each of the filament slots has its own output line, not all of the filament wire in the output line has to be wound back to the spool when changing colour, but only the part that is fed back into the inner chamber of the extruder. On the one hand, this reduces the possibility of spool entanglement and, on the other hand, prevents the material from running out at a moment's notice.

The ACE PRO is also equipped with an integrated buffer system that quickly recognises tangles or blockages. Should a problem occur, the printer automatically pauses and notifies you of the error so that you can react as quickly and appropriately as possible.

Seamless material change

Enter the data for your filament before starting to print: When a roll is used up, the system seamlessly switches to another spool with identical material and colour. This keeps your printing process uninterrupted and you can look forward to perfect results.

Included in the contents of delivery:

• Anycubic Kobra 3 V2
• Anycubic ACE Pro
• 1 x printhead
• 1 x touchscreen
• 1 x Spool Holder
• 1 x Cable Holder
• 1 x Purge Wiper
• 2 x M2x14 screws
• 4 x M3x6 screws
• 2 x M4x16 screws
• 1 x M3x10 screws
• 1 x M3x8 screws
• 1 x U-Disc
• 2 x power cable
• 1 x signal cable
• 4 x cable collector
• 4 x Filament Tube for ACE Pro
• 1 x filament tube for Kobra 3 V2
• 1 x spanner set
• 1 x Hexagon spanner set (4.0, 3.0, 2.5, 2.0, 1.5)
• 1 x filament sample
• 1 x Nozzle Cleaner
• 1 x Grease
• 1 x camera module

Technical specifications: