colorFabb Brassfill 750 g

3D printing with brass filament

Out of StockNo longer in production.

Similar products:

Product information & technical details

Manufacturers: colorFabb
Product types: Metal Filaments
Filament colour: Gold / Brass
Net weight: 750 g, 1500 g
Recommended processing temperature: 195 - 220 °C
Diameter related tolerance : ± 0,05 mm

Description

3D printing using metal!

This unique filament allows you to print with copper in the comfort of your own home.
Immediately after detachment, the parts have a matte finish.
With a little sanding and polishing, the parts get a shiner and shimmer finish. The most unique finish of all 3D printing filaments.

The weight of the material is about 3 times heavier than the normal PLA filament.
The tests showed reliable results with all metal hot-ends.

Hot-ends with a teflon insulator may possibly become blocked due to adhesion.

Additional Information

TIP! Depending on the set-up, 3D printers and Slicer software, colorfabb metal filaments may require more flow when compared to the PLA counterparts.

TIP! When the printed component is sanded and polished, the bronze particles begin to shimmer. Start off with a grain size of 120 - 180 to ensure that the printed layers disappear. Continue with a finer grain size and round off with a white cloth for polishing purposes.

Only for advanced users.

Downloads