Formfutura Castable LCD Series Castable Wax Resin - Blue

Wax-based casting resin

$72.61

($145.21 / kg, All prices excl. VAT. - Excludes delivery costs)

Content: 500 g

Delivery estimated by Friday, 29 March

In stock from March 26

Why is it taking longer?

Why is it taking longer? This item is currently not in stock, but will be back soon. You can still order now - the item will be shipped to you as soon as it is back in stock. Close this note

Features & Advantages

  • For dental, jewellery and industrial applications
  • Ashless burnout
  • Low shrinkage factor
  • Incredibly fine details

Item no.: FF-CSRSLCD-BLUE-00500, Content: 500 g, EAN: 8719956556265

Product information & technical details

  • Item no.: FF-CSRSLCD-BLUE-00500
  • Manufacturer No.: CSRSLCD-BLUE-00500
  • Manufacturers: Formfutura
  • Content: 500 g
  • Product types: Resin
  • Light source: LCD
  • Filament colour: Blue
Description

Formfutura's Castable LCD Series - Castable Wax Resin is a pourable photopolymer 3D printing resin based on blue wax that is specially designed for compatibility and excellent processability with all types of open source LCD / LED / MSLA 3D printers.

The castable wax resin is a high-precision wax-based casting resin for 3D printing of direct investment castings for dental, jewellery and industrial applications. The wax component in this 3D printed resin offers a clean, ashless burnout and extremely low expansion factor, which ensures that the wax filler melts and shrinks out of shape without expanding, protecting fragile investments.

Castable Wax Resin has an exceptionally low shrinkage factor and produces printed parts with smooth surfaces and incredibly fine details. FormFutura's Castable LCD Series - Castable Wax Resin has been extensively tested and validated by both dental technicians and jewellers.

Key Features

  • Ashless burnout
  • Low expansion factor
  • High dimensional accuracy with a low shrinkage factor
  • Smooth printing with incredibly fine details
  • Almost odourless processing
  • Compatible with all open-source SLA, DLP and LCD 3D printers in the range from 385 to 405 nm

Applications

  • Tooth shapes
  • Jewellery shapes
  • Industrial forms

Preparations Before Starting Printing

  • Before use, make sure that the resin is at room temperature (20 ° C +/- 1 ° C)
    • The wax component in the resin makes the resin more viscous at lower temperatures.
    • Below 16 ° C, the resin solidifies too much and becomes too viscous for good 3D printing results
  • Shake the bottle for at least 2 minutes before each use.
  • After shaking the bottle, let the resin sit for 10 minutes to allow air bubbles to escape from the resin
    • The resin can be poured back into the bottle from the vat once the printing is complete
  • Always use protective measures such as safety glasses and nitrile gloves when handling resins.

Post-processing

  • We recommend that you post-process your 3D print in order to achieve the material properties
    • Rinse your 3D printed object in IPA or (bio) ethanol for about 5 minutes
  • An ultrasonic cleaner is preferred/recommended
    • Make sure items rinsed with IPA and/or (bio) ethanol are perfectly dry before further curing
  • Place the purged parts in a well-ventilated area for at least 30 minutes or use compressed air for at least 2 minutes
    • Cure your object in a high-performance curing chamber for approx. 20-30 minutes at 65 ° C
  • The preferred curing wavelength is between 300 and 410 nm

Safety

Please always note that when you are 3D printing with resins, you are working with chemicals and should always be careful and use the personal protective equipment specified in our safety data sheets.

  • Always wear respiratory protection when sanding/cutting the resin object.
  • Always use nitrile gloves when handling resins and uncured resin items.
Hazard and precautionary statements

Signal word: Warning

Precautionary statements:

  • P280 - Wear protective gloves/protective clothing/eye protection/face protection.
  • P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.
  • P264 - Wash thoroughly with plenty of water after use.
  • P272 - Contaminated work clothing should not be allowed out of the workplace.
  • P273 - Avoid release to the environment.
  • P302+P352 - IF ON SKIN: Wash with plenty of water.
  • P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P321 - Specific treatment (see instructions on this label).
  • P332+P313 - If skin irritation occurs: Get medical advice/attention.
  • P333+P313 - If skin irritation or rash occurs: Get medical advice/attention.
  • P337+P313 - If eye irritation persists: Get medical advice/attention.
  • P362+P364 - Take off contaminated clothing and wash it before reuse.
  • P501 - Dispose of contents/container according to local/national regulations.

Hazard statements:

  • H315 - Causes skin irritation
  • H317 - May cause an allergic skin reaction
  • H319 - Causes serious eye irritation
  • H412 - Harmful to aquatic life with long lasting effects
Filament spool dimensions
Downloads

Questions & Answers about Castable LCD Series Castable Wax Resin - Blue

Receive answers from other customers who purchased this product. Please forward any other order-related questions to our Customer Service Team.

  • Will this work with elegoo mars pro 2

    1 Answer, last answered on May 11 2022

Customer Reviews

2 English reviews written for Formfutura Castable LCD Series Castable Wax Resin - Blue

3 customer reviews in all languages

3,4 out of 5 stars
5 stars
3 (60%)
4 stars
0 (0%)
3 stars
0 (0%)
2 stars
0 (0%)
1 Stars
2 (40%)

5 reviews
2 customer reviews in English
3 customer reviews in all languages

Related products

  • placeholder
  • placeholder
  • placeholder
  • placeholder

Customers also bought

  • placeholder
  • placeholder
  • placeholder
  • placeholder