10 English reviews written for 3DJAKE ecoPLA - Glow in the Dark
99 customer reviews in all languages
| 5 stars | | 151 | (65%) |
|---|---|---|---|
| 4 stars | | 46 | (20%) |
| 3 stars | | 16 | (6%) |
| 2 stars | | 10 | (4%) |
| 1 Stars | | 6 | (2%) |
Filter reviews:
-
Derek Owen
February 12 2024
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. -
Samantha
March 23 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Review
Rated with 5 out of 5 stars.
Stunning filament. Highly UV-reactive and strong glow properties. Easy to print, too: some minor stringing but not unexpected. Will try a slightly lower temperature setting next time to see if this resolves it.
Was this rating helpful? (0) (0)
-
KnoppersDE
December 18 2021
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Glow in the Dark PLA - good but not perfect
Rated with 4 out of 5 stars.
Does hold the charge reasonably long, but could be a bit longer. The filament does barely fit on the spool (250g), therefore it slides off the spool at the beginning sometimes. Does not happen if you have used a bit of the spool anymore.
Otherwise does exactly as advertised and worth the extra money.Was this rating helpful? (0) (0)
-
Andreas
November 29 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Nice filament.
Rated with 4 out of 5 stars.
Good filament with nice bonelike color in the light. Classic glow in the dark effect - we like. Does not hold the charge that long but it´s the same with all glow in the dark colors these days.
Was this rating helpful? (3) (0)
-
Stress Tech
July 28 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Stress Tech
Rated with 5 out of 5 stars.
Gone through 2x1KGs rolls with no problems, no jamming's, what so ever. Used the Micro Swiss A2 MK8 hardened nozzle on an Ender 5 plus. Used 0.4, 0.6 and 0.8 nozzle versions and they all worked well. The higher the infill the longer the charge it holds. Ran some prints at 80mm/s speed and the prints still came up well. Leaves a nice bone finish with a fine hint of grey. Glows well but the strength doesn't last long, but still holds a very small charge all the way through the night.
Now using a 0.8mm Micro Swiss A2 MK8 hardened nozzle all the way at 80mm/second speed. Bed temp: 60c and nozzle temp at 215c because I'm using a all metal Micro-swiss hot end and a big 0.8mm nozzle printing at 0.4mm layers. I would put the nozzle temp to 210c if I were to use a smaller nozzle though.
I would buy this, again and again. Thank you 3D-Jake.Was this rating helpful? (1) (0)
-
Daniel Yeates
April 07 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Glow in the Dark PLA
Rated with 5 out of 5 stars.
Absolutely fantastic product - My son now has glow in the dark planets hanging all around his bedroom :-) Easy to print with, and a great finish!
Was this rating helpful? (1) (0)
-
Pomikk
February 05 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Its a very strong and great glowing PLA
Rated with 5 out of 5 stars.
The glow is awesome, though it dont glow as long as i wanted it to glow, still its very nice.
I printed some stuff with this and some stars and moons etc to my daughter so she had something to look at while she was falling asleep, they where a hit.
The prints are VERY strong its a strong filament, so i think it might wearout a brass nozzle if you print 1kg, so be sure to use a harder nozzle.Was this rating helpful? (4) (0)
-
ROBERTO
February 11 2019
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Filamento luminoso
Rated with 5 out of 5 stars.
Fantastico, facile da stampare e al buoi fa una luce fantastica ve lo consiglio ottimo!!!!!��
Was this rating helpful? (3) (0)
-
Nick
November 25 2018
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Review written by Nick
Rated with 5 out of 5 stars.
Compared with other "Glow in the dark" products, this eco glow is incredible as it actually glows very brightly. Print wise it flows very well in two machines. My only problem is fine tuning my zortrax printer to optimise the finish. I am printing in a cold garage so heated bed is a must. However if you are printing inside I reckon 3D Jake is a winner.
Was this rating helpful? (5) (0)
-
Nicolas
July 18 2018
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Great quality filament
Rated with 5 out of 5 stars.
The filament printed flawlessly and it's glowing properties are outstanding. Just as a tip: It strings a bit more than normal PLA so tweaking a bit with the printer settings to counter this are recommended but not necessary.
Was this rating helpful? (7) (1)
Magazine Articles:
Discover 3DJake:
-
Delivery in 3 business days.
More than 9.250 products
Secure payments
with SLL encryption technology
Derek Owen
Rated with 2 out of 5 stars.
Slightly disappointed in the longevity of the glow, but I think I was over optimistic
Was this rating helpful? (0) (0)