10 English reviews written for 3DJAKE ecoPLA Ultra-Satin Gold
41 customer reviews in all languages
5 stars | | 75 | (80%) |
---|---|---|---|
4 stars | | 12 | (12%) |
3 stars | | 3 | (3%) |
2 stars | | 0 | (0%) |
1 Stars | | 3 | (3%) |
Filter reviews:
-
-
pretty, but not what is advertised
Rated with 1 out of 5 stars.
I was able to print 1 thing with it and that was pretty. But afterwards I wasn't able to print anything else because the nozzle, and the whole tubing were clogged. We also found scrapings of the filament at the feeder. After measuring the filament we concluded that the filament had a thickness of 1.9mm instead of 1.75mm. So I'm not going to use it again.
We had to replace the nozzle of our brandnew 3d printer because it was ruined.Was this rating helpful? (1) (0)
-
ecoPLA Ultra satin gold
Rated with 5 out of 5 stars.
I am so happy with this colour. Prints perfectly and models look so nice.
Was this rating helpful? (0) (0)
-
Not PLA
Rated with 5 out of 5 stars.
For newcomers, this is, and is not PLA. Only for beauty - and beautifull it is
Was this rating helpful? (0) (2)
-
Prints beautifully
Rated with 4 out of 5 stars.
Nice shine printed some trophies/medals and christmas decorations with this.
Was this rating helpful? (1) (0)
-
Good Quality
Rated with 5 out of 5 stars.
Good
Was this rating helpful? (0) (0)
-
Always believe in.....
Rated with 3 out of 5 stars.
Great gold tint but had a number of issues getting it to stick to the bed.
Was this rating helpful? (0) (1)
-
Nice, when it isn't destroying printers. Awful spool.
Rated with 1 out of 5 stars.
The Ultra-Satin range can produce some wonderful prints but it has a tendency to jam (particularly the gold) in such a way as to have to disassemble the hot end to replace the PTFE tube. I've had 3 complete blockages necessitating 2 new PTFE tubes from around half a spool. When first extruding after a filament change it appears to inflate and then deflate and it seems thicker than it should be but this may be an optical illusion. The spool is awful and only has a single filament parking position, which wastes filament trying to get a decent length before putting it away. Once parked the filament will bend and is too risky to straighten to use again so the filament needs to be pruned. I don't know why this is called ecoPLA because it is neither cheap nor ecological compared to other brands. The filament wind is untidy and prone to tangling, especially with the single parking position. I have also had more difficulty with getting a good first layer with this than any other brand or material I have tried. The finish on prints that complete is undeniably very good. There is a wonderful lustre and smoothness that lends itself to figurines but it really doesn't like supports and bridging. I tried to like it but it was just too many hot end strip-downs in the end.
Was this rating helpful? (3) (2)
-
.
Rated with 5 out of 5 stars.
.
Was this rating helpful? (1) (0)
-
Fantastic
Rated with 5 out of 5 stars.
This is a classy colour. Prints are amazing.
Was this rating helpful? (0) (0)
Amazing material, prints like a charm!
Rated with 5 out of 5 stars.
Looks amazing
Was this rating helpful? (0) (0)