9 English reviews written for 3DJAKE ecoPLA Yellow
81 customer reviews in all languages
| 5 stars | | 186 | (80%) |
|---|---|---|---|
| 4 stars | | 35 | (15%) |
| 3 stars | | 5 | (2%) |
| 2 stars | | 1 | (0%) |
| 1 Stars | | 3 | (1%) |
Filter reviews:
-
rodrigo
November 17 2024
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. -
John
March 18 2023
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. 3DJAKE ecoPLA - Yellow
Rated with 1 out of 5 stars.
Ok im new to 3d printing running a elegoo neptune 3 plus. Have had no issues to date like i have with this filament just to get it to adhere to the bed it has to be turned up to 70 also been up and down the z offset like a yoyo trying to find a sweet spot. Extruder temp seems to be most stable at about 205 which is in spec (195-210). The good news is i can now get it to stick but have to go higher than its specified bed temp of 60 but i can get it to stick real well to the bed however it is stringy and blobby and drops bits on starting a new section not pretty. So far have wasted about 10% of the roll trying to get the first model printed but just getting the first layer down there is always blobs and bit going where they not supposd to and tried all kinfs of temp combinations and z offsets. Never had trouble like it with the other filaments i used which include elegoo brand and others all PLA. Perhaps this is not compatible with an elegoo printer or maybe its my lack of experience certainly not a picnic. In order to resolve it i tried printing a simple model but as ever got blobby bits and stringy bits. I noted it was packed in poor quality heatshrunk wrapping not vacuum packed like other brands i have had no problem with. Probably going to return it if cant get it laying down properly by end of the day.
Was this rating helpful? (0) (1)
-
YK - Austria
September 29 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Good
Rated with 5 out of 5 stars.
Good filament, easy to work with.
Was this rating helpful? (0) (0)
-
WKM
October 26 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Good
Rated with 4 out of 5 stars.
No issues.
Was this rating helpful? (0) (1)
-
Yellow PLA
Rated with 3 out of 5 stars.
I purchased a yellow and a purple PLA.
I initially started a print at 205°c but found myself upping to 215 due to underextrusions on large flat areas.
My nozzle was only fluctuating +/- 1°c so it's not as if the hot end was too cold for the filament to pass.
It's A good strong colour and adheres well to a glass bed, but really struggling with the flow rate of it.
Some areas look fine then there will be sections with gaps.
The colour seems to come out Matt too.
Had real high hopes for this brand as they sold every colour I use. I was initially hoping to change my entire range to 3dJake. Sadly I can't due to the inconsistency of the filament.
After a print, I swapped back to my old filament and ran the same print with the same settings. No extrusion issues what so ever.Was this rating helpful? (4) (0)
-
Chrigu
March 09 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Perfect PLA-filament for my projects
Rated with 5 out of 5 stars.
Perfect PLA-filament for my projects for a reasonable price.
Was this rating helpful? (0) (0)
-
ZLC
January 26 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Beautiful colour
Rated with 5 out of 5 stars.
Very good PLA, easy to print, brilliant, strong colour, after printing the material is very good to touch.
Was this rating helpful? (1) (0)
-
Kakos
October 09 2018
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Overall Great
Rated with 4 out of 5 stars.
Only issue I had was a few (3-4) black spots in the filament.
Was this rating helpful? (4) (0)
-
Rob
September 13 2018
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Review written by Rob
Rated with 5 out of 5 stars.
Great price basic PLA. Printed really nicely.
Was this rating helpful? (1) (0)
Magazine Articles:
-
Delivery in 3 business days.
More than 10.950 products
We deliver worldwide to
more than 40 countriesSecure payments
with SSL encryption technology
Good but not best
Rated with 3 out of 5 stars.
Looks great and I use it regularly, however I notice it stick less good to the plate than other PLA filament.
Not a problem with textured plates, but I have to be careful when trying to plate of smooth surfaces.
Was this rating helpful? (0) (0)