4 English reviews written for Extrudr Green-TEC PRO Carbon
24 customer reviews in all languages
| 5 stars | | 33 | (67%) |
|---|---|---|---|
| 4 stars | | 7 | (14%) |
| 3 stars | | 2 | (4%) |
| 2 stars | | 3 | (6%) |
| 1 Stars | | 4 | (8%) |
Filter reviews:
-
Alexander
January 07 2023
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. -
Elliot
March 31 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Surface quality is nuts...
Rated with 5 out of 5 stars.
I used this with a 0.6mm Nozzle X at 0.2mm layer height, and I can honestly say that this is the first filament that I have used that I can't see the individual layers... The Matt surface finish of the material is wonderful. Printing on the satin sheet of my MK3S I had no issues what so ever with warping, even on quite large parts, the bed adhesion was great.
This material is really stiff and thus quite brittle, however depending on your application, this likely wont be an issue.
I actually think it is quite a good value too.
final thoughts; if you're looking for a PLA Upgrade for a project where stiffness is key, just do it.Was this rating helpful? (0) (0)
-
ialan
April 22 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Extrudr Green-TEC PRO Carbon
Rated with 4 out of 5 stars.
Very good product however I couldn't give it 5 stars as it is extremely difficult to stick to the bed.
Was this rating helpful? (3) (2)
-
jousis
August 05 2019
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Ease of use + stiffness
Rated with 5 out of 5 stars.
I don't like regular greentec but this blend is amazing. Very easy to print, no warping, minimal stringing , impressive surface quality and top notch stiffness.
Note, there is very little flex and it is relatively easy to snap (no predictable bend, just snaps). But if you want something that withstands high-ish temperatures, is stiff and easy to print, try it. Watch out the layer orientation if you are aiming at ultra-stiffness.
(my) Print settings: minimal retraction (0.5mm@40mm/s with e3d v6 w/ titan extruder) plus coasting/wiping, watch out the priming of the nozzle after retracts. If you see blobs, reduce priming distance ! (in s3d: extra retract distance= -0,4).
Bed: PEI @ 60C (or less) is enough, 210C for 60mm/s (more to increase layer bonding, less to decrease stringing a little more). Fan enabled (printing with blower-type at 60%).
Prints fine with 0.4mm nozzle, I had no issues.
You can use very little infil because this filament is very stiff, even two perimeters behave like 5-6 on PLA. 1st layer above infil is also excellent, similar to PLA, you don't need a lot of top layers.Was this rating helpful? (28) (0)
Magazine Articles:
Discover 3DJake:
-
Delivery in 3 business days.
More than 9.250 products
Secure payments
with SLL encryption technology
It's great actually
Rated with 4 out of 5 stars.
The only downside I have is that even at 80C you can bend parts with ease. So working temp of 80C is a myth . Otherwise - it's a great filament.
Was this rating helpful? (7) (0)