Mr Beam Mr. Beam II
Easy-to-use laser cutter with a large work surface
- Highly efficient laser
- Plug and play
- Large work surface
- Built-in camera
Product information & technical details
The Mr Beam II laser cutter is designed to offer an alternative to traditional laser cutters. Industrially used machines are on the one hand too expensive for the end user and on the other - because of their complex software too difficult to operate. Mr Beam has developed a laser cutter that is versatile and very easy to use.
Highly efficient laser
Laser cutting and engraving is a non-contact material processing process. You can use it to process a variety of materials.
Unpack and get started
All devices are delivered ready to use. Simply connect the laser head and the optional air filter system and you're ready to go.
Easy to use
The Mr Beam II is executed via a web application in your browser. There is no software installation required. The integrated WLAN allows a fast and uninterrupted connection.
- Laser class 1
- Working surface 500 mm x 390 mm
- Strong and highly efficient 5W shortwave laser (450nm)
- Safety housing made of metal and a transparent protective cover
- High precision: 0.2mm kerf - 0.1mm positioning accuracy
- Air filter system (optional)
- CE certification
- Integrated camera for easy placement of your design templates
- Integrated WLAN
- Firmware updates "Over the Air"
- Browser-based Plug & Play software for Mac, Windows, Linux and Tablets
- (no installation required)
To make the Mr Beam II more user-friendly, a camera has been integrated into the protective cover. When the lid is open, the camera takes a picture of the work area every few seconds so you can accurately position the material you want. The process, therefore, saves a lot of time because the template position does not always have to be measured in advance - just insert it and get started.
Air Filter System (optional)
Thermal processing produces more or less smoke depending on the material. While the smell of the wood can still remind of a cosy camping night, it differs from other materials that can give off unpleasant odours. At the same time, the particles can damage the inner parts of the laser cutter. The air filtration system provides a simple solution for a safe and odourless environment.
Easy to use
In the development of the Mr Beam II, special focus was placed on the user-friendliness of the devices. You can easily work with all standard files. Just prepare a design in a program of your choice or use the built-in template library. With a drag-and-drop system, you can easily upload and place your template in the web interface.
Which materials can be processed with it:
|Plywood||up to 4mm||Yes|
|Balsawood||up to 5mm||Yes|
|Leather||up to 1mm||Yes|
|Kraftplex||up to 3mm||Yes|
|Felt||up to 6mm||Yes|
|Fabric / textile||up to 3mm||Yes|
|Paperboard||up to 1mm||Yes|
|Foamboards||up to 6mm||No|
|Acrylic||No||Yes (color dependent)|
|Cardboard||up to 5mm||Yes|
|Latex and natural latex||up to 1mm||No|
|Foam rubber||up to 20mm||No|
|Mirror||No||Yes (special pretreatment)|
|Basalt fibre||up to 1mm||No|
Outside dimensions: 724mm x 538mm x 170mm
Working surface: 500mm x 390mm x 38mm
One of the largest 3D printing communities is called Thingiverse (MakerBot). Here, more than 1.000.000 uploads are available.