SUNLU FilaDryer SP2

The FilaDryer SP2 from SUNLU is a smart addition to your 3D printer toolkit - it is not only a high-performance filament dryer, but also a well-designed storage solution – modular, stackable, and ready for your next printing project!

Tip: The two separate components – the heating base and the airtight box – can be used flexibly. Need to store more filaments? You can stack up to three boxes on top of each other!

Silicone Sealing for Optimal Drying Performance

Thanks to its dual silicone-sealed construction, moisture stays exactly where it belongs: outside! Even at ambient humidity levels of 50%, the FilaDryer SP2 maintains an internal humidity of around 25% (according to the manufacturer). Whether you’re actively drying or simply storing your filaments, they’ll remain fully protected and always ready for use.

Compatibility with Various Filament Sizes

Whether you're using small 0.25 kg spools or large 3 kg spools, the spacious box makes no compromises. Even unusual spool sizes or damaged spools can be securely held in place thanks to the clever spool holder design.

► Compatible with 1.75 mm and 2.85 mm diameters, spool widths up to 153 mm, and a maximum spool diameter of 250 mm (e.g. 2 x 1 kg spools, 1 x 2 kg spool, 1 x 3 kg spool, 1 x 1 kg spool).

Triple Heating and Safety System

The triple heating and safety system, featuring a 200 W PTC heating element with fan, thermal protection switch, and intelligent temperature control, ensures reliable drying with no risk. Simply switch it on, set your preferences, and relax - the SP2 takes care of the rest!

Smart features

The carry handle and the recessed grip on the underside make the FilaDryer SP2 highly portable. A built-in hygrometer displays the current humidity level at all times - no app or additional accessories required. And if you want to print directly from the box: three filament outlets on each side make it easy.

Temperature and time recommendations by filament type

Included in the delivery:

• 1 x Storage box
• 1 x Heating base
• 1 x Hygrometer
• 1 x Desiccant
• 1 x Desiccant box
• 1 x Power cable
• 1 x Spool roll
• 2 x Air lock
• 2 x PTFE hose, 8 cm
• 2 x PTFE hose, 1 m
• 1 x Instruction manual

Technical specifications: