3DJAKE Vacuum Bag (Set of 5), 300 x 340 mm
Additional vacuum bags for the 3DJake vacuum set
- Available in 3 sizes
- Multiple use
Similar products
Product information & technical details
- Item no.: CB-VB5
- Content: 1 set
- Manufacturer No.: VB5
- Manufacturer: 3DJAKE
- Product type: Filament storage
Description
Safe storage
The vacuum sealing set from 3DJake is a simple and inexpensive solution for storing your printing materials. It protects against moisture, dust and dirt! This will keep your filaments dry longer and won't break easily.
The vacuum bags are available in two sizes:
- 300 x 340 mm for spools with an outer diameter of 200 mm and a width of 75 mm
- 400 x 500 mm for 2 spools up to an outer diameter of 200 mm and width 75 mm
- 600 x 800 mm for spools up to an outer diameter of 355mm and width 182mm (4kg & 8kg spools).
Contents of delivery:
- 5 x vacuum bags
Note: The pump is not included in this set.
A small pump is required for the small, 300 x 340 mm vacuum bags.
A larger pump must be used for the 400 x 500 mm & 600 x 800 mm bags.
Accessories
Legal guarantee & manufacturer details
More information: https://europa.eu/youreurope/guarantees
Questions & Answers about 3DJAKE Vacuum Bag (Set of 5)
Customer Reviews
5 English reviews written for 3DJAKE Vacuum Bag (Set of 5)
71 customer reviews in all languages
| 5 stars | | 136 | (61%) |
|---|---|---|---|
| 4 stars | | 49 | (22%) |
| 3 stars | | 21 | (9%) |
| 2 stars | | 6 | (2%) |
| 1 Stars | | 10 | (4%) |
222 reviews
5 customer reviews in English
71 customer reviews in all languages
-
Was this rating helpful? (0) (0)
-
plesti
July 27 2026
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Rated with 4 out of 5 stars. Too much work
Good for long time storage but too much hassle to fiddle with it every print job
Was this rating helpful? (0) (0)
-
Rated with 1 out of 5 stars. Owner
utter rubbish.
valve doesn't work - had to pierce the valve to get air out of it , then had to tape it to seal it!
perhaps my vacuum doesn't created enough suction, but these are just pants.Was this rating helpful? (7) (0)
-
Tim Ellis
August 15 2023
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Rated with 2 out of 5 stars. 400 x 500 mm quality issues
I purchased two 400 x 500 mm sets and had to bin one bag from each set due to quality issues.
Was this rating helpful? (0) (0)
-
Fábio Martins
October 23 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Rated with 5 out of 5 stars. Top-notch products and service
A product that fulfills its intended purpose.
Order delivered in a short time and in perfect condition.
Top-notch service!Was this rating helpful? (2) (0)
Magazine Articles:
Discover 3DJake:
-
Delivery in 3 business days.
More than 11.700 products
We deliver worldwide to
more than 40 countriesSecure payments
with SSL encryption technology
Barely OK.
I agree with many users that these bags are too tight. 30x35cm is too small for regular 1 Kg spools, I found another shop selling 33x38cm bags that are just the right size. To be honest, both these and the larger bags aren't exactly state of the art. The weak spot is that silly valve. It won't hold the vacuum for long. My trick to improve the seal is to ,apply aluminum tape on top of the valve. That works OK and the vacuum lasts longer, but not for weeks, just a few days. instead of hours if you don't use the aluminum tape.
I arrived to the conclusion that the best thing to do would be to glue the valve, using the bag as a non vacuum sealed container. With a sachet of silica gel inside the air would be dry enough for a reasonable amount of time.