Bambu Lab AMS HT

The Bambu Lab AMS HT is the answer to the challenges of 3D printing with technical materials. With a drying temperature of up to 85°C, automatic moisture control and RFID-supported material recognition, it is specially designed for high-performance and other sensitive filaments.

Multi-material & Multi-talented

Combine up to 4 x AMS 2 Pro and 8 x AMS HT modules in series, which lets you control up to 24 filaments in a single setup. Colours, support materials, technical mixtures - whatever the case may be!

The integrated bypass output allows out to process even soft or brittle materials separately and without detours.

Drying temperature of up to 85°C

With a drying temperature of up to 85°C, the AMS HT specialises in what standard options often cannot handle: moisture-sensitive high-temperature filaments. Whether nylon, polycarbonate or carbon-reinforced special compounds, this system ensures optimum storage and precise drying.

Thanks to the electromagnetic air valve and automatic spool rotation, the entire process runs more evenly, faster and more efficiently.

Smart display of the drying progress

An integrated status display lets you keep an eye on the drying progress at all times - clear, concise and practical.

RFID recognition

RFID synchronisation automatically detects Bambu Lab filaments and sets the appropriate drying parameters.

At the same time, extremely robust ceramic feeders (Vickers hardness 1200!) and reliable temperature protection ensure maximum safety and durability - even with intensive use.

Full compatibility with Bambu Lab printers

The AMS HT is fully compatible with Bambu Lab 3D printers!

►Note: The drying function cannot be used on its own without a connection to the printer!

Included in delivery:

• 1 x Bambu Lab AMS HT
• 1 x dessicant
• 2 x PTFE tubes
• 1 x Bambu Bus cable-6 pin
• 1 x power cable

Note: The filament shown in the photo is NOT part of the delivery!

USER GUIDE

Technical specifications:

► Do you have a Bambu Lab A-Series 3D printer?

To connect your A-series printer to the AMS, AMS 2 Pro or AMS HT, you will also need the AMS Hub (SA013).

► Are you using a printer from the X1 or P1 series?

Planning to use only one AMS HT? Then you will need:

• PTFE Tube Coupler (FAZ006)
• Bambu Bus Cable - 4pin (CAB002-N)
• Filament Buffer (SA003)

Do you want to connect multiple AMS devices (AMS HT, AMS, or AMS 2 Pro)? If so, we recommend:

• PTFE Tube Coupler (FAZ006)
• Bambu Bus Cable - 4pin (CAB002-N)
• AMS Hub (SA002-N)

► Do you have a printer from the P2 Series?

To connect one or two AMS units (AMS HT, AMS, or AMS 2 Pro), you will need:

• Filament Buffer (SA011)
• Bambu Bus Cable - 6pin (CAB035)

If you're planning on more than 2 AMS units, you will also need:

• 4-in-1 PTFE adapter (FAZ013-N)
• Filament Buffer (SA011)
• Bambu Bus Cable - 6pin (CAB035)

► Do you have an H2S?

If you want to connect more than one AMS (AMS 2 Pro or AMS HT included), you will need the 4-in-1 PTFE adapter (FAZ013-N).

► Are you printing with an H2D or H2C?

If you want to use more than two AMS (AMS 2 Pro or AMS HT), you will also need the 4-in-1 PTFE adapter (FAZ013-N).