BondTech BMG Drive Gears IDGA Kit

With this BMG Drive Gear IDGA Kit from Bondtech you can design your own BMG extruder!

The BMG Drive Gears IDGA Kit is compatible with:

• All Bondtech BMG extruders,
• All Bondtech upgrade kits for Prusa i3,
• All Bondtech Upgrade Kits for Prusa Mini,
• All Bondtech DDX Direct Drive eXtruders for Creality,
• NMG-HT for Funmat HT,
• Other BMG extruders that use an original Bondtech main shaft assembly and drive gears.

Hints:

► To use this BMG IDGA set you need 3x8x3.0 mm ball bearings. 2 pieces are included in delivery.

► When designing the plastic housing for one of the compatible extruders, you should make sure that you allow for sufficient axial movement along the main shaft of approx. 0.25 mm.

Tip: With the BMG IDGA Kit you reduce the concentricity of the main drive gear on your Bondtech BMG Dual Drive Extruder. If you are interested in a BMG IDGA without additional components from this set, you can purchase it here: BMG IDGA Retro-fit Set.

Included:

• 1x BMG IDGA retro fit
• 1x secondary drive wheel 1.75/5.0 mm
• 2x 3 x 8 x 3.0 mm ball bearings
• 1x 3 x 20mm shaft
• 2x needle bearings