colorFabb nGen Red Transparent

The All-Rounder among the Filaments in Transparent Red Colour

This item is no longer being offered by the manufacturer

For High Demands
High Heat Resistance up to 85 ° C
Easy to Print
Co-Polyester

Similar products:

3DJAKE PETG Red Transparent

6 Model types

Extrudr PETG Transparent Red

4 Model types

Fillamentum CPE HG100 Red Hood Transparent

2 diameters

Product information & technical details

Diameter:	1,75 mm, 2,85 mm
Product Line:	nGen
Product types:	PET / Copolyester Filaments
Property:	Food Safe
Filament colour:	Transparent, Red
Net weight:	750 g
Recommended processing temperature:	220 - 240 °C
Recommended heating temperature:	75 - 85 °C

Description

3D printing has many applications today. Prototyping, conception, figures or even toys.

For every application you have the ideal material with the new nGen filament from ColorFabb. nGen filament has properties perfect for functional parts and is amazingly printable.

The glass transition temperature at 85 ° C far exceeds that of PLA.

nGen gives the possibility of flexibility and a wide processing temperature range for users. The filament is very easy to process even at low temperatures.

	nGen	PLA	ABS	PETG
Glass Transition Temperature	85°C	50°C	100°C	75°C
Toughness	++	-	+++	+++
Printing Temerature	220 - 240°C	190 - 220°C	250 - 260 °C	240 - 260°C
Printability	+++	+++	+	++
Odourless	+++	+	-	++
Surface Clearness	+++	+	-	++

More information

How to print with nGen:

For the best results, it is important to always adjust the slicer settings for the respective material. We will explain the most important settings afterwards.

Heated platform:

nGen is best to print on heated platforms. The ideal way is to always approach the glass temperature. The pressure bed should therefore be heated to 70-85 ° C.

Printing Temperature:

In normal settings, such as 0.2mm layer height and 50 mm/s printing speed we recommend a printing temperature of 220 - 240 ° C.

Cooling:

If you constantly print with 100% cooling, it may be that separate layers appear. If this is the case, you will need to reduce the cooling a bit to fix the problem.

Bridging:

We recommend reducing the speed of bridging a bit. The cooling can be set to 100%.

Retraction / Withdrawal:

The retraction settings of PLA should also match those of nGen. However, it may be that these settings need to be adjusted slightly.