DimaFix Adhesive Spray

Universal adhesive for different materials

  • For heated building boards
  • Strong adhesion
  • For many different materials

All prices excl. VAT. Excludes delivery costs

Delivery to United States is not possible.

Item no.: I3D-DIMAFIX, Content: 400 ml

EAN: 8436556020018

  • For heated building boards
  • Strong adhesion
  • For many different materials

Product information & technical details

Item no.: I3D-DIMAFIX
Manufacturer No.: DIMAFIX
Manufacturers: DimaFix
Content: 400 ml
Product types: 3D Printer Accessories


Good adhesion of your printed parts on the print bed is a must in 3D printing! DimaFix is now available so that your object remains fixed during the printing process and avoid deformation. DimaFix is an aerosol spray adhesive for 3D printers with a heated print bed that prevents warping of large objects.

Dimafix provides a strong bond between the first layer and the build surface when the bed is heated above 60 ° C. Below 60 ° C DimaFix is ineffective, so prints can be easily removed from the building board. The adhesive spray is completely water-soluble, so cleaning the construction panel is a simple process.

Different print bed temperatures lead to different degrees of adhesion:
Below 60 ° C: No adhesion, the objects can be detached from the plate
60 - 75 ºC: Medium adhesion for simple geometries
75 - 95 ºC: High adhesion for complex geometries and long prints
Above 95 ºC: Very high adhesion, for very complex geometries and very long prints

How to use DimaFix

  1. Clean the build plate of your 3D printer
  2. Check if the print bed temperature is below 50 ° C
  3. Spray DimaFix on your print bed (use a well-ventilated room)
  4. Warm up your print bed and start printing
  5. After printing, wait for the print bed to cool
  6. Remove the printed item from the print bed


  • Prevents warping
  • Suitable for all types of materials (especially ABS filaments)
  • Strong adhesion during printing
  • Dissolves after printing virtually by itself
  • Recommended for printing on heated beds
  • Easy to clean - the product is water soluble
  • Each spray can allows more than 100 applications

Hazard and precautionary statements

Signal word : Danger

Precautionary statements:

  • P101 - If medical advice is needed, have product container or label at hand.
  • P102 - Keep out of reach of children.
  • P103 - Read label before use.
  • P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P211 - Do not spray on an open flame or other ignition source.
  • P251 - Do not pierce or burn, even after use.
  • P260 - Do not breathe dust/fume/gas/mist/vapours/spray.
  • P271 - Use only outdoors or in a well-ventilated area.
  • P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
  • P501 - Dispose of contents/container according to local/national regulations.

Hazard statements:

  • H222 - Extremely flammable aerosol
  • H229 - Pressurized container: may burst if heated

Questions & Answers about DimaFix Adhesive spray

Pose a question about this product to customers who have already purchased the item. Please forward any other order-related questions to our Customer Service Team.

Customer Reviews

7 English reviews written for DimaFix Adhesive spray

35 customer reviews in all languages

4,6 out of 5 stars
5 stars
48 (77%)
4 stars
8 (12%)
3 stars
4 (6%)
2 stars
0 (0%)
1 Stars
2 (3%)

62 reviews
7 customer reviews in English
35 customer reviews in all languages

Did you know?

In Amsterdam, a steel bridge was 3D-printed by robots on-site.