eSUN ePA12-CF Natural, 1.75mm / 1000g
Durable nylon filament with 15% carbon fibres
$75.89 $84.33 -10%
($75.89 / kg, All prices excl. VAT. - Excludes delivery costs)
Features & Advantages
- Low moisture absorption
- High strength & toughness
- Temperature resistant
- Antistatic
- Self-lubricating
- High dimensional stability
- High chemical resistance
Item no.: ESUN-ePA12-CF175N1, Content: 1.000 g, EAN: 6922572201323
Product information & technical details
- Item no.: ESUN-ePA12-CF175N1
- Manufacturer No.: ePA12-CF175N1
- Manufacturers: eSUN
- Content: 1.000 g
- Diameter: 1,75 mm
- Product types: Carbon Filament, PA - Nylon Filaments
- Filament colour: Black
- Net weight: 1000 g
- Recommended processing temperature: 270 - 300 °C
- Recommended heating temperature: 45 - 60°C
Description
ePA12-CF is a PA12 (nylon)-based material developed by eSUN and LUVOCOM, to which 15% carbon fibre has been added to improve its strength, rigidity and toughness. In many cases, ePA12-CF can even be used as a replacement for metal.
Unlike traditional nylon filaments, ePA12-CF has a lower water absorption rate and the dimensions of the printed parts are less affected by humidity and temperature.
ePA12-CF is also self-lubricating, wear-resistant and temperature-resistant - these properties make the material ideal for printing gears and parts that are exposed to high temperatures. The continuous use temperature can reach up to 120 °C, the short-term use temperature even up to 160 °C.
With surface resistivity less than 102Ω, ePA12-CF can be used as conductive and anti-static.
Key Features of eSUN ePA12-CF
- Low moisture absorption
- High strength & toughness
- Temperature resistant
- High stiffness & impact resistance
- Self-lubricating
- High dimensional stability
- Matt surface
- Abrasion-resistant
- Antistatic
- High chemical resistance
- Good printability
Applications of eSUN ePA12-CF
- Mechanical engineering
- Chemical industry
- Electrical and Electronics
- Robots
- Drones
- Automotive industry
- Textile industry
- Aerospace
Notes on printing eSUN ePA12-CF
eSUN ePA12-CF needs to be dried before printing (For about 12 hours at 70℃) to get the best printing results.
The ePA12-CF line has strong rigidity and is not easy to bend. Excessive bending when feeding the filament should therefore be avoided as far as possible.
Because ePA12-CF is an abrasive material that causes increased wear of the nozzle and extruder gears, hardened steel nozzles or ruby nozzles are recommended for printing. In addition, if conditions permit, hardened steel extruder gears should be selected.
Filament spool dimensions
Downloads
Questions & Answers about eSUN ePA12-CF Natural
Customer Reviews
2 English reviews written for eSUN ePA12-CF Natural
| 5 stars | | 2 | (100%) |
|---|---|---|---|
| 4 stars | | 0 | (0%) |
| 3 stars | | 0 | (0%) |
| 2 stars | | 0 | (0%) |
| 1 Stars | | 0 | (0%) |
2 reviews
2 customer reviews in English
-
Roland
November 12 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. -
Dan
November 03 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. G
Rated with 5 out of 5 stars.
Prints very easily on my Qidi X-Max. Dimensions as per design.
Was this rating helpful? (1) (0)
Related products
Customers also bought
Magazine Articles:
Discover 3DJake:
-
Delivery in 3 business days.
More than 9.150 products
Secure payments
with SLL encryption technology
On my second roll
Rated with 5 out of 5 stars.
This product took some getting used to and tweaking of setting but once sorted its brilliant. You WILL need a filament dryer and it WILL need to be properly dry before every print to get consistent results. I would choose PA12 over PA6 everytime. PA6 absorbed too much moister over time so even though PA6 parts are good off the bed after two weeks they're flimsy and useless, this doesnt happen with PA12 (this product). I print with a 260 degrees hot end, 60 degree bed and I have to print at 95% flow. Dont be surprised if you need slightly odd settings. I also recommend a 0.6mm nozzle as this will take the pressure of the extruder. I'm about to order my second roll!
Was this rating helpful? (5) (0)