Anycubic Photon Mono M5s

Fast resin printer with 12K resolution

Content: 1 pc

Delivery to United States is not possible.

Features & Advantages

  • 10.1 inch LCD display
  • 12K resolution
  • Average print speed of 105 mm/h
  • Level-free printing

Item no.: ANY- PM5SA0BK-Y-O, Content: 1 pc

Product information & technical details

  • Item no.: ANY- PM5SA0BK-Y-O
  • Manufacturer No.: PM5SA0BK-Y-O
  • Manufacturers: Anycubic
  • Content: 1 pc
  • Product types: 3D Printers
  • Light source: LCD
  • Assembly: Fully assembled
  • Printing Technology: UV LCD
  • Printer Display: Touch Display
  • Supported operating systems: Windows (7+), Mac OS X (10.7+)
  • Interfaces: USB - Connection
  • Building platform : 218 x 123 x 200

The Anycubic Photon Mono M5s is the first levelling-free resin printer for the home! With 12K resolution and a build volume of 218 x 123 x 200 mm, it allows you to turn the most creative ideas into reality. With fine details, pointed edges and smooth surfaces without layers, this resin printer guarantees the best printing results!

12K resolution and 480:1 contrast for incomparable details

With a 10.1-inch monochrome LCD screen and an incredible 12K resolution of 11520 x 5120 pixels, Photon Mono M5s achieves 19 μm accuracy. The 12K LCD screen with 480:1 contrast delivers sharp edge and stunning surface finish with hair-sharp print detail!

You can print up to over 2000 hours with the LCD!

With an average print speed of 105 mm/hr 3x faster

Photon Mono M5s prints at an average speed of 105 mm/h when using a high-speed resin. By using a high-speed release film, the release force is effectively reduced, resulting in highly successful print quality. At the same time, the separation height is reduced and the take-off speed is increased. Compared to other resin printers that require 30 mm/h for the same model, Photon Mono M5s is even 3 times faster!

When using a standard resin, Photon Mono M5s operates at an average speed of 70 mm/h.

Level-free printing for more success

On the cantilever arm, the resin printer has a mechanical sensor. This first detects the fit between the printing platform and the floating levelling module, and then automatically adjusts it based on the detection data. Annoying levelling errors are thus eliminated and more printing success is guaranteed!

Automatic device inspection

The resin printer features automatic device testing. In doing so, the printer performs several tests on the functionality or connectivity of its individual parts: the exposure screen, the mechanical detection module, and the motor operation status.

This allows hardware problems to be quickly identified and fixed without wasting valuable time searching for a needle in a haystack.

Resin detection mode

If an "unforeseen" resin shortage occurs, unrepairable printing errors can result. For this, Photon Mono M5s is equipped with an intelligent resin detection mode. Before printing starts, the system automatically checks whether the amount of resin in the reservoir meets the print requirements.

Print status detection

This feature reminds you of common printing errors caused by a lack of resin. This significantly reduces wasted resin and time. The feature also provides analysis for possible causes of errors and tips to increase printing efficiency.

Anycubic App

With the Anycubic App, popular pre-cut models and STLs are at your fingertips. A user-friendly task display ensures full control over the printing process.

Anycubic Photon Workshop 3.1 with new support algorithm

Anycubic's slicing software has been updated to Anycubic Photon Workshop 3.1. In the new version, you can use the "Intelligent Mode" option, for example, to set exposure parameters to match the tiniest details and exact size of the model. This helps reduce printing errors due to incorrect parameter settings.

The new support algorithm brings many advantages:

  • Improved print stability,
  • Minimised possibility of model surface damage,
  • Easy removal of support structures with no residue,
  • Repairs to damaged models,
  • Simply designed punching and slicing processes,

Other features:

  • Removable cover that effectively protects against UV radiation
  • Resin container with scale markings
  • LED matrix UV light source
  • 4.3'' TFT touchscreen
  • Laser-engraved aluminium alloy build platform
  • LCD anti-scratch film
  • Power supply: 100 watts rated power


  • 1 x Photon Mono 5Ms
  • 1 x Build platform
  • 1 x Resin Vat
  • 1 x Putty knife
  • 1 x Tool Kit
  • 1 x Mask
  • 1 x Anti-scratch film kit
  • 1 x USB flash drive
  • 1 x Power adapter
  • 1 x Gloves
  • 1 x Funnel
  • 1 x Instruction manual

Questions & Answers about Anycubic Photon Mono M5s

Receive answers from other customers who purchased this product. Please forward any other order-related questions to our Customer Service Team.

Customer Reviews

English reviews written for Anycubic Photon Mono M5s

Related products