AprintaProPrintaFix Basic
The best solution for adhesion problems with 3D printing!
- Simple application
- Low cost per print
- Good adhesion
- Made in Germany
Add to Wish List Item no.: APP-9190001018164, Content: 100 ml
EAN: 9120078080016
| 100 ml: | $13.08 | ($13.08 / 100 ml) |
|---|---|---|
| 500 ml: | $54.99 | ($11.00 / 100 ml) |
- Simple application
- Low cost per print
- Good adhesion
- Made in Germany
Product information & technical details
| Item no.: | APP-9190001018164 |
|---|---|
| Manufacturer No.: | 9190001018164 |
| Manufacturers: | AprintaPro |
| Content: | 100 ml |
| Category : | 3D Printer Accessories |
|---|
Description
PrintaFix was specially developed for FDM / FFF 3D printing!
With PrintaFix, you no longer need BlueTape or similar adhesives. Due to the simple application and the superb adhesion qualities, PrintaFix stands out.
The spray can be used on both unheated and heated beds.
Thus delay / warping is a thing of the past!
- Cost-effective application
- Fast use: shake and spray PrintaFix
- Environmentally friendly unlike hairspray and other solutions.
- Easily washable under warm water!
More information
Please shake bottle well before use.
Note: Set the spray head of the 500ml bottle to "Spray".
Excellent alternative to 3DLac, Magigoo etc.
Hazard and precautionary statements
Signal word: Hazard
Precautionary statements:
- P101 - If medical advice is needed, have product container or label at hand.
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P337+P313 - If eye irritation persists: Get medical advice/attention.
- shop.shopwawiproductcertificate.securitydatasheet.p.P501
Hazard statements:
- H225 - Highly flammable liquid and vapour
- H319 - Causes serious eye irritation
- H336 - May cause drowsiness or dizziness
Accessories
Questions & Answers about AprintaPro PrintaFix Basic
Customer Reviews
| | | 30 | (62%) |
|---|---|---|---|
| | | 10 | (20%) |
| | | 4 | (8%) |
| | | 3 | (6%) |
| | | 1 | (2%) |
48 reviews
3 customer reviews in English
23 customer reviews in all languages
-
-
Review written by Ian on Verified Reviews
Rated with 5 out of 5 stars.
Fantastic product . I would recommend it to everyone ... I will be buying it again
Has this review been helpful? (4) (0)
-
Fancy
Rated with 5 out of 5 stars.
Good glue that not only fits both ABS and PLA, but also most other filaments. It comes with brief but sufficient instructions on how to use.
Easy to apply, and easy to remove. It's isopropyl based so the smell is much more pleasant, and is less of a fire hazard then acetone or hairspray.
You apply it directly on glossy aluminum or glass bed for best results. Bottom of the printed object ends up beautifully shiny, without artifacts and imperfections that you usually end up with after using hairspray, paper glue stick or ABS slurry.
Is the price justified? Bottom of the object will look nice, but you will spend about 5-10ml for one 200x200mm coat. You be the judge.Has this review been helpful? (4) (0)
It is already possible to create prints using materials such as titanium, ceramics, wood, and many more.
Recent Articles:
Explore 3DJake International:
3DJake International shopping highlights
-
Delivery in 10 - 12 working days.
-
We ship globally to more than 90 countries
-
Secure Payment using SSL Encryption Technology
Not that great adhesion (only ok for pla)
Rated with 2 out of 5 stars.
Tried it on my bare aluminium hot bed and got mediocre at best results:
pla 4 in 5 prints kept attached (long flat sword warped)
petg 2 in 3 prints failed
bronzefill 0 in 3 prints (kinda s*cked as it is expensive filament)
so no more Printafix for me...
Has this review been helpful? (3) (3)