FabConstruct3D Scanner Matting Spray

Prepare Objects for 3D scanning


  • For Shiny and Reflective Objects
  • Simple Application
  • Suitable for Fine Details

All prices excl. VAT. Excludes delivery costs

Delivery to United States is not possible.

Item no.: FAB-33180, Content: 400 ml

  • For Shiny and Reflective Objects
  • Simple Application
  • Suitable for Fine Details

Product information & technical details

Item no.:
Manufacturer No.:
400 ml
Category :
3D Scanners


Prepare objects for the 3D scan

Scanning reflective, glossy or very dark is a problem for many 3D scanners. Therefore it is recommended to edit the model before the scan.

Due to the fine-grained structure of the spray, a uniform layer with minimal thickness is sprayed onto the model. The 3D matting spray is glare-free and easy to remove.

By treating the model with the spray, a white topcoat is created.

It is recommended to spray a thin layer from a distance of about 20 - 30cm.

Suitable for fine detail scanning

Due to the small particle size, fine surface details smaller than 0.2mm are not lost. The coating can be easily washed off with water and a brush.


Do not inhale the spray! Use the spray only outdoors and / or use respiratory protection (fine dust).
The spray can attack very sensitive materials or settle in rough surfaces. The possibility of a lasting change (eg. fading) of the surface can not be excluded! Therefore, first test the spraying and removal on small spots or test objects.

Hazard and precautionary statements

Precautionary statements:

  • P102 - Keep out of reach of children.
  • P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P211 - Do not spray on an open flame or other ignition source.
  • P251 - Do not pierce or burn, even after use.
  • P271 - Use only outdoors or in a well-ventilated area.
  • P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
  • shop.shopwawiproductcertificate.securitydatasheet.p.P501

Hazard statements:

  • H222 - Extremely flammable aerosol
  • H229 - Pressurized container: may burst if heated
  • H319 - Causes serious eye irritation
  • H336 - May cause drowsiness or dizziness

Questions & Answers about FabConstruct 3D Scanner Matting Spray

Receive answers from customers regarding this specific product

Customer Reviews

NASA makes pizza using 3D printers for astronauts in space.