Fillamentum PLA Extrafill Green Grass
High-quality PLA for FDM 3D printers in the shade green grass
$22.74
($3.03 / 100 g, All prices excl. VAT. - Excludes delivery costs)
Features & Advantages
- Variety of colours
- Easy to print
- High precision processing
- Biodegradable
Item no.: FTM-PLA1B6010, Content: 750 g, EAN: 8595632813064
Product information & technical details
Item no.: | FTM-PLA1B6010 |
---|---|
Manufacturer No.: | PLA1B6010 |
Manufacturers: | Fillamentum |
Content: | 750 g |
Diameter: | 1,75 mm, 2,85 mm |
---|---|
Product types: | PLA Filaments |
Filament colour: | Green |
RAL colour: | RAL 6010 |
Net weight: | 750 g |
Recommended processing temperature: | 190 - 210 °C |
Recommended heating temperature: | Not required |
Description
Fillamentum PLA Extrafill is a filament for FDM 3D printers.
The material is easy to use and is characterized by its high print quality when it comes to fine details. The layer adhesion is also very good.
The PLA Extrafill is made from natural components and therefore biodegradable.
Fillamentum guarantees high precision in the processing of filaments. The diameter tolerance is ± 0.05 mm, which is strictly controlled during the entire production process.
The filaments are available in a variety of colours.
Questions & Answers about Fillamentum PLA Extrafill Green Grass
Customer Reviews
1 English review written for Fillamentum PLA Extrafill Green Grass
2 customer reviews in all languages
5 stars | | 4 | (66%) |
---|---|---|---|
4 stars | | 0 | (0%) |
3 stars | | 0 | (0%) |
2 stars | | 1 | (16%) |
1 Stars | | 1 | (16%) |
6 reviews
1 customer review in English
2 customer reviews in all languages
Did you know?
In Amsterdam, a steel bridge was 3D-printed by robots on-site.
Related products
Customers also bought
Recent Articles:
Explore 3DJake:
-
Free delivery in United States
from $250.00 -
Delivery in 12 working days.
More than 7.950 products
We deliver worldwide to
more than 90 countries
Bad bed adhesion
Rated with 2 out of 5 stars.
For some reason this filament just doesn't want to stick to the bed. Especially small features have no hope of sticking. Every other filament i have tried have adhered to the bed with the correct settings, but no matter what i tried, nothing helped with this one.
Settings i tried:
- temperatures 180C-220C
- Increasing and decreasing initial layer line width
- initial layer speeds 15-40mm/s
- Initial layer height 0.05-0.3mm
Only thing i didn't try was masking tape, but i shouldn't have to use tape for PLA IMHO
Was this review helpful? (1) (0)