It should be washed with alcohol and cured with a high power UV LED at 60C for best results.

Absolutely! Just pay attention to the correct burnout instructions.

Correct settings can be found here:https://www.liqcreate.com/supportarticles/which-printing-settings-should-be-used-to-print-liqcreate-resins-on-the-phrozen-sonic-mini-4k/ And burnout times here: https://www.liqcreate.com/supportarticles/working-with-liqcreate-wax-castable-3d-printing-resin/

Liqcreate doesn't have an HDT value for this resin as it is designed to be heated and vaporised rather than used structurally.

Yes it would be suitable. But for ease of use and depending on your printer another might be suitable. For instance, if you have a Phrozen printer our Phrozen resin might be better - they have pre-configured profiles on Chitubox. Bluecast resin is also easy to use as they have settings listed on their website for many different printers.

11 questions in English for Liqcreate Castable Wax

13 Questions in different languages

11 questions in English for Liqcreate Castable Wax

13 Questions in different languages

Buy product

Filter questions and answers:

СОВМЕСТИМВ ЛИ ЭТА СМОЛА С Elegoo mars 4?

This question has not been answered yet.
When casting use for dental ch/co frames Could someone tell me printer settings for phrozen mighty 8k also burnout phase, new to print and casting wax

This question has not been answered yet.
Is this compatible with the HALOT-MAGE PRO 8K Resin 3D Printe?

This question has not been answered yet.
I'm doing larger models that I'm hollowing out and when I go to burnout the mold I'm having my molds crack. Has anyone had success with hollow models,

This question has not been answered yet.
Is this resin good for use with an Elegoo Mars pro 2 to make moulds for investment casting?

1 Answer, last answered on December 28 2021
- Andrew
  
  December 28 2021
  
  Customer Service
  
  Yes it is suitable
Do you wash with water or alcohol? And do you UV cure after printing?

1 Answer, last answered on November 24 2021
- Andrew
  
  November 24 2021
  
  Customer Service
  
  It should be washed with alcohol and cured with a high power UV LED at 60C for best results.
Can this be used for lost wax casting?

1 Answer, last answered on November 23 2021
- Andrew
  
  November 23 2021
  
  Customer Service
  
  Absolutely! Just pay attention to the correct burnout instructions.
Whats the correct settings for phrozen mini sonic 4k and the burn out process

1 Answer, last answered on September 29 2021
- Andrew
  
  September 29 2021
  
  Customer Service
  
  Correct settings can be found here:https://www.liqcreate.com/supportarticles/which-printing-settings-should-be-used-to-print-liqcreate-resins-on-the-phrozen-sonic-mini-4k/
  
  And burnout times here: https://www.liqcreate.com/supportarticles/working-with-liqcreate-wax-castable-3d-printing-resin/
What is the HDT of this product?

1 Answer, last answered on August 11 2021
- Andrew
  
  August 11 2021
  
  Customer Service
  
  Liqcreate doesn't have an HDT value for this resin as it is designed to be heated and vaporised rather than used structurally.
I’m casting chess pieces - with them being larger than standard jewellery the price is important but also ideally there would be low shrinkage. Is this the best resin for the job?

1 Answer, last answered on June 09 2021
- Andrew
  
  June 09 2021
  
  Customer Service
  
  Yes it would be suitable. But for ease of use and depending on your printer another might be suitable. For instance, if you have a Phrozen printer our Phrozen resin might be better - they have pre-configured profiles on Chitubox. Bluecast resin is also easy to use as they have settings listed on their website for many different printers.