Recreus FilaFlex Original 82A Filaments
FilaFlex is a flexible filament for 3D printers.
The material has an elongation at break of 700% and is therefore ideally suited to manufacture special components or spare parts.
-
Recreus Filaflex White, 1.75 mm / 500 g
- Extremely elastic
- High adhesion to the printing bed
- Odourless
-
Recreus Filaflex Fluor, 1.75 mm / 500 g
- Extremely elastic
- High adhesion to the printing bed
- Odourless
-
Recreus Filaflex Black, 1.75 mm / 500 g
- Extremely elastic
- High adhesion to the printing bed
- Odourless
-
Recreus Filaflex Orange, 1.75 mm / 500 g
- Extremely elastic
- High adhesion to the printing bed
- Odourless
-
Recreus Filaflex Gold, 1.75 mm / 250 g
- Extremely elastic
- High adhesion to the printing bed
- Odourless
-
Recreus Filaflex Skin 1, 1.75 mm / 500 g
- Extremely elastic
- High adhesion to the printing bed
- Odourless
-
-
Recreus Filaflex Yellow, 1.75 mm / 500 g
- Extremely elastic
- High adhesion to the printing bed
- Odourless
-
Recreus Filaflex Aquamarine, 1.75 mm / 250 g
- Extremely elastic
- High adhesion to the printing bed
- Odourless
-
Recreus Filaflex Magenta, 1.75 mm / 500 g
- Extremely elastic
- High adhesion to the printing bed
- Odourless
-
Recreus Filaflex Transparent, 1.75 mm / 500 g
- Extremely elastic
- High adhesion to the printing bed
- Odourless
-
Recreus Filaflex Green, 1.75 mm / 250 g
- Extremely elastic
- High adhesion to the printing bed
- Odourless
-
Recreus Filaflex Blue, 1.75 mm / 500 g
- Extremely elastic
- High adhesion to the printing bed
- Odourless
-
Recreus Filaflex Grey, 1.75 mm / 500 g
- Extremely elastic
- High adhesion to the printing bed
- Odourless
All prices excl. VAT.
The filament works best with Direct Drive or Double Gear extruders. The material is limited when used in conjuction with Bowden extruders.
