Creality SpacePi V2 Plus Filament Dryer

The Creality SpacePi V2 Plus is the larger model in the second SpacePi generation and is designed for anyone who regularly works with moisture-sensitive or technical filaments. It can hold two filament spools at once and combines the upgraded heating and sensor technology of the V2 Series with a completely redesigned airflow system for faster, more even drying with minimal energy consumption.

High-temperature drying up to 75°C

With a maximum drying temperature of 75°C, the SpacePi V2 Plus is well equipped for demanding materials. In addition to common filaments such as PLA, PETG and TPU, it can also reliably dry technical materials such as ABS, PC, ASA, PA, PP and PET, as well as fibre-reinforced filaments including PETG-CF, PA-CF and PLA-CF. This helps effectively reduce stringing, clogs and poor layer adhesion.

Second-generation temperature and humidity sensor

The second-generation sensor responds in real time to even the smallest temperature and humidity fluctuations inside the chamber. Even minimal changes are detected immediately, keeping the drying conditions stable and precisely at the selected level.

Energy-saving airflow design

The innovative single-fan dual-duct system of the V2 Plus distributes air much more efficiently than the previous generation. One fan supplies both drying chambers at the same time via two separate air ducts. In direct comparison, the SpacePi V2 Plus reaches a maximum airflow of 12.79 CFM, compared with 5.98 CFM on the SpacePi Plus. This means more than twice as much air movement inside the chamber.

360° hot air circulation

Hot air flows evenly around the spool from all sides for fast, continuous drying. No area of the spool is left untreated, reducing the risk of uneven moisture removal.

Advanced PTC heating with ceramic element

An advanced PTC heater with ceramic element is positioned directly at the fan inlet, producing a particularly stable and even stream of hot air. The air flows consistently through the chamber, drying the spool thoroughly from the outer layers through to the innermost winding.

Smart presets for 12 filament types

With integrated smart presets for 12 filament types, simply select the material, set the time and start the drying process. There is no need to spend time researching the ideal drying parameters. Recommended drying temperatures at a glance:

Note: For best results, follow the drying recommendations provided by the respective filament manufacturer.

LCD touchscreen with anti-static coating

The LCD touchscreen shows all relevant values in real time: current temperature (PV), target temperature (SV), selected material, remaining time and humidity. The anti-static coating ensures a clear, stable display. The drying time can be freely set for up to 48 hours, ideal for particularly hygroscopic materials such as PA-CF or nylon.

Power-loss memory

In the event of a power cut, the SpacePi V2 Plus automatically resumes the last selected drying parameters once power is restored. The drying process simply continues from where it was interrupted.

Thoughtful details

• easy temperature display switching between °C and °F
• heat-protected roller system for low-friction, secure spool guidance
• one-touch power switch for simple and safe switching on and off directly on the device

► Key features of the Creality SpacePi V2 Plus Filament Dryer at a glance:

• capacity for two filament spools at the same time,
• high-temperature drying up to 75°C, also for ABS, PC, PA, PA-CF and other technical materials,
• 360° hot air circulation for fast, even drying,
• advanced PTC heating with ceramic element,
• second-generation temperature and humidity sensor for stable drying conditions,
• smart presets for 12 filament types,
• 48-hour timer for complete drying cycles,
• LCD touchscreen with anti-static coating,
• power-loss memory for automatically resuming drying after a power cut,
• heat-protected roller system, easy switching between °C and °F, one-touch switch.

Technical specifications: