Sovol Chamber Heating Module, SV08 Max

With the Sovol Chamber Heating Module, you can upgrade your Sovol printer with additional chamber heating, creating ideal conditions for printing with high-temperature filaments. Materials such as ABS, ASA, PC and PA are sensitive to temperature fluctuations inside the build chamber. Warping, layer separation and cracks are typical consequences. The heating module addresses this problem by keeping the internal temperature constant, resulting in significantly more reliable print results.

Safe use instructions:

• Before installation or connecting any cables, disconnect the printer completely from the power supply. Otherwise, there is a risk of electric shock.
• The metal surfaces of the heating module become hot during operation. Avoid touching them directly to prevent burns.
• When printing with high-temperature filaments, both the glass door and the upper glass cover should remain closed after switching on the additional heater in order to keep the temperature inside the build chamber constant.

Included in delivery:

• 1 x Chamber Heating Module Assembly
• 1 x User Manual
• 1 x Tool Kit
• 1 x Insulation Baffle Module