3DJAKE Resin - Black
Allround Resin for DLP & LCD 3D Printer in Black
- Hardly any smell
- Fast curing
- Low shrinkage
- Made in the EU
Item no.: CLR-RES-STD-BK-1000, Content: 1.000 g
EAN: 9120099287333
- Hardly any smell
- Fast curing
- Low shrinkage
- Made in the EU
Share:
| 500 g: | $41.49 | ($8.30 / 100 g) |
|---|---|---|
| 1.000 g: | $64.99 | ($6.50 / 100 g) |
Product information & technical details
| Item no.: | CLR-RES-STD-BK-1000 |
|---|---|
| Manufacturer No.: | RES-STD-BK-1000 |
| Manufacturers: | 3DJAKE |
| Content: | 1.000 g |
| Shore Hardness : | D82 |
|---|---|
| Product types: | Resin |
| Light source: | LCD, DLP |
| Filament colour: | Black |
Description
3DJake Resin is an all-round resin with excellent properties for versatile applications. The resin was specially developed for 3D printers with DLP / LCD light sources. Our resins are very durable, easy to paint and have exceptional physical properties.
Our resin is almost odourless and prints 3D models with extremely high accuracy and a very smooth surface.
Characteristics:
- Low odour
- Fast curing
- High level of detail
- Sharp contours
- Excellent dimensional accuracy and low shrinkage
The resin is compatible with many different 3D printers. Optimal for UV light sources from 395 - 405 nm.
Please note the safety instructions for this material.
Post-processing:
- Drain the model over the resin tank
- Remove the model from the platform
- Wash off the residual resin from the model with isopropanol or resin cleaner
- Post-cure the model for max. 3 minutes under UV light
- Remove the support structure
More information
Recommended print settings: (0.05 - 0.1 mm layer)
- 8 - 14 second exposure time per layer
- 5 - 10 bottom layers
Hazard and precautionary statements
Signal word : Danger
Precautionary statements:
- P101 - If medical advice is needed, have product container or label at hand.
- P102 - Keep out of reach of children.
- P280 - Wear protective gloves/protective clothing/eye protection/face protection.
- P310 - Contact your doctor/poison control centre immediately.
- P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P501 - Dispose of contents/container according to local/national regulations.
Hazard statements:
- H315 - Causes skin irritation
- H317 - May cause an allergic skin reaction
- H318 - Causes serious eye damage.
- H400 - Very toxic to aquatic life
- H411 - Toxic to aquatic life with long lasting effects
- EUH 204 - Contains isocyanates. May produce an allergic reaction.
Accessories
Questions & Answers about 3DJAKE Resin - Black
-
Every time the print stick to the FEP. Also, went I clean the tank, the resins cure so quickly, I have to scrap it off the FEP, why ? Can I have parameters for a ELEGOO MARS pls?
-
What is the time per layer on my elegoo mars 2 pro ? It has a mono screen so print cure much faster than other printers.
Customer Reviews
2 English reviews written for 3DJAKE Resin - Black
11 customer reviews in all languages
| 5 stars | | 5 | (26%) |
|---|---|---|---|
| 4 stars | | 4 | (21%) |
| 3 stars | | 2 | (10%) |
| 2 stars | | 2 | (10%) |
| 1 Stars | | 6 | (31%) |
19 reviews
2 customer reviews in English
11 customer reviews in all languages
-
Fine rise
Rated with 4 out of 5 stars.
A little more transparent then expected.
Was this review helpful? (0) (0)
-
Ing
Rated with 1 out of 5 stars.
Very low adhesion.
Was this review helpful? (1) (2)
Did you know?
In Amsterdam, a steel bridge was 3D-printed by robots on-site.
-
-
Liqcreate Flexible-X
250 g, 1.000 g -
-
Liqcreate Tough-X
250 g, 1.000 g -
-
-
Liqcreate Premium Black
250 g, 1.000 g -
-
-
-
-
DruckWege Type D Black
500 g, 1.000 g -
-
-
-
3DJAKE Resin - White
500 g, 1.000 g -
3DJAKE Resin - Transparent
500 g, 1.000 g -
3DJAKE Isopropyl Alcohol
1 liter -
-
3DJAKE Resin Cleaner
500 ml, 1.000 ml, 5.000 ml, 10.000 ml -
-
-
3DJAKE Resin Filter Set
1 set -
-
3DJAKE Resin Light Grey
500 g, 1.000 g -
3DJAKE Resin - Red
500 g, 1.000 g -
3DJAKE Resin Flexplate System
11 Model types -
-
3DJAKE Color Mix Resin Basic
500 g, 1.000 g -
Recent Articles:
Explore 3DJake:
3DJake Shopping Highlights
-
Free delivery in United States
from $250.00 More than 7.000 products
We deliver worldwide to
more than 90 countriesSecure payments
with SLL encryption technology
If the model is still tacky after post curing then it may have printed with an insufficient normal layer exposure or the model was not cleaned well enough or the post curing was not long enough. If you still have issues please contact our customer support and they can help you through the steps :)